INSTALLATION INSTRUCTION
13
ENGLISH
1
If pressing
button long for 5 seconds, it enters into AC Ez setup mode.
- If pressing once shortly, it doesn’t enter into installer setup mode.
Please press more than 5 seconds for sure.
2
When you enter the setting mode initially, function code is displayed and on/off led of
indoor #1 is blinking.
No.
Function
Code
Value
1
Master/Slave Setting
1
: Master
: Slave
M
S
2
Group 1 product Select
2
Air conditioner / Ventilator
Group Number Setting
0~F : Group Address - : No use of this group
3
Group 2 product Select
3
Air conditioner / Ventilator
Group No. Setting
0~F : Group Address - : No use of this group
4
Indoor units searching
(Master controller only)
4
Indoor unit searching
5
°C / °F setting
5
°C : Celsius
°F : Fahrenheit
Installer Setting Code Table
Installation setup mode _ How to enter installer setup mode
Installer setting mode is to set the detail function of the AC Ez.
If the installer setting mode is not set correctly, it can cause problems to the product, Injury
to user or property damage. This must be set by an certificated installer, and any installation
or change that is carried out by a non-certified, user should be responsible for the results.
In this case, free service cannot be provided.
CAUTION
!
1,MFL69157009,영어 2017. 9. 20. 오후 7:32 페이지 13