6
Sequential Charging*
1. Connect the charger adapter to the USB cable, and plug it into a wall
outlet. Connect the cable to the PowerTank 10,000 mAh Portable
Charger & Power Pack’s Micro USB input port (3).
2. Using the USB cable, connect the PowerTank 10,000 mAh Portable
Charger & Power Pack’s USB output port (1, Port A or B) to your
mobile device’s USB port.
Depending on the mobile device, the charging process may not stop
even though the battery is fully (100%) charged (charging times
may vary depending on the mobile device’s manufacturer).
3. When your mobile device is finished charging, remove the USB cable
connecting it to the PowerTank 10,000 mAh Portable Charger &
Power Pack.
* During sequential charging, the PowerTank 10,000 mAh Portable
Charger & Power Pack will be simultaneously charged while charging
the mobile device(s).
,
NOTE
•
During sequential charging, the charging current will be limited; therefore,
charging may take longer than usual.
•
It is recommended that you use the charger adapter plugged into a wall
outlet during sequential charging. Sequential charging via USB port to PC
may not charge.
•
If the charger adapter is disconnected during sequential charging of the
PowerTank 10,000 mAh Portable Charger & Power Pack and a mobile
device, the mobile device will be charged via the PowerTank 10,000 mAh
Portable Charger & Power Pack.
