LG PL5, Owner'S Manual, Page: 27 / 35

Operating
27
Oper
ating
2
y
When you enjoy Dual Mode, Multi phone pairing
is not supported.
- Main speaker ( ) connects only one
Bluetooth device.
y
In Dual Mode, you can connect only the main
speaker( ) with the
Bluetooth device.
y
If you turn the power off and then on again, two
speakers need to be reconnection for using Dual
Mode.
y
If the units fail to connect Dual Mode, go to step
1 and try again.
y
When Dual Mode connection is on processing,
you cannot search the units on other
Bluetooth
devices.
y
When you disconnect Dual Mode connection,
press
3
DUAL buttons of one of the two
speakers again.
y
When you enjoy Dual Mode, you can adjust the
Volume, Playback, Sound Effect or Mood light of
both main ( )and other ( ) speakers at the
same time.
y
When you connect Dual Mode connection while
using AUX mode, this speaker automatically
changes to
Bluetooth mode.
y
In Dual Mode, you can receive a call on only main
speaker due to audio howling.
y
If you connect 3.5 mm stereo cable in Dual Mode,
it will cancel Dual Mode and then change to AUX
mode.
y
You can connect to Dual Mode connection with
“LG XBOOM" app. In this case, the speaker that
is connected to “LG XBOOM” app will be the
main speaker. You are only able to connect to one
speaker when connected to Dual Mode with “LG
XBOOM" app.
y
To change the Bluetooth device in Dual Mode,
press and hold j for 2 seconds to disconnect
current Bluetooth device and connect to the
desired Bluetooth device.
y
When you connect a Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized between
each device.
y
In Dual Mode, make the distance between the
speakers as close as possible each other.
y
Depending on network environment, the Dual
Mode may not work well.
y
In Dual Mode, you can only use voice command
on the main speaker.
y
Some mobile phones might not play music
properly when you try to connect Dual Mode
during playback.
y
The speaker might not synchronize audio with
video (ex. TV etc).
y
Press 1 button, 3 DUAL button to cancel
Dual Mode.
y
Press the 3 MULTI button to disable Dual
mode and start Multi mode connection.
,
Note