29
MAGIC REMOTE CONTROL
1
2
1
Displayed when you press
the
Wheel (OK)
button
on the magic remote control.
Check program information.
2
If you point and hold the
pointer at the bottom left of
the screen while watching
projector, the
MY APPS
icon is displayed. Clicking
the icon displays the
MY
APPS
menu.
To Register the Magic Remote Control
To use the Magic Remote control, register it with your projector first.
1
Put batteries into the Magic Remote and turn the Projector on.
2
Point the Magic Remote at your projector and press the
Wheel
(OK)
on the remote control.
•
If the projector fails to register the Magic Remote, try again after turning
the projector off and back on.
To Re-register the Magic Remote Control
1
Press the
(Home)
and
(BACK)
buttons at the same time, for
five seconds, to unpair the Magic Remote with your projector.
2
Press the
Wheel (OK)
button towards the projector to re-register
the magic remote control.
•
Pressing and holding the
(EXIT to LIVE)
button will let you cancel
and re-register Magic Remote at once.
