8
EN
•
The appliance shall be installed in accordance with national wiring
regulations.
•
When the power cord is to be replaced, the replacement work
shall be performed by authorized personnel using only genuine
replacement parts.
•
This appliance must be properly grounded to minimize risk of
electric shock.
•
Do not cut or remove the grounding prong from the power plug.
•
Attaching the earth wire to the power outlet cover screw does not
ground the appliance unless the cover screw is metal, uninsulated,
and the power outlet is grounded through house wiring.
•
If you have any doubt whether the air conditioner is properly
grounded, have the power outlet and circuit checked by a qualified
electrician.
•
The refrigerant and insulation blowing gas used in the appliance
require special disposal procedures. Consult a service agent or a
similarly qualified person before disposing of them.
•
If the supply cord is damaged, it must be replaced by the
manufacturer or its service agents or similarly qualified person in
order to avoid a hazard.
•
The appliance shall be stored in a well-ventilated area where the
room size corresponds to the room area as specified for
operation.
•
The appliance shall be stored in a room without continuously
operating open flames (for example an operating gas appliance)
and ignition sources (for example an operating electric heater).
•
The appliance shall be stored so as to prevent mechanical
damage from occurring.
