Installation Manual
13
ENGLISH
EXPANSION KIT Installation
Installation
confirmation plate
Thermistor #B OUT
Thermistor #A OUT
Thermistor #B IN
Thermistor #A IN
Rotary switch #B
Rotary switch #A
Outdoor unit communication line #B
Outdoor unit communication line #A
[COMMUNICATION PCB CONFIGURATION]
10. Distinguish and connect the IN and OUT on the Thermistor terminal on the
communication PCB inside AHU CONTROL KIT.
11. Check the rotary switch number and write the installation confirmation plate of
EXPANSION KIT.
The error number displayed on AHU Controller in case of an error is displayed
for the rotary switch number, and error on Outdoor unit can be easily
estimated during the service.
n
2 EXPANSION KIT and Outdoor unit are connected to one communication PCB,
and each is classified and connected.
Ex) EXPANSION KIT A, Outdoor unit A, outdoor communication line A, thermistor
A IN, thermistor A OUT
‘
All connected to A circuit
EXPANSION KIT B, Outdoor unit B, outdoor communication line B, thermistor
B IN, thermistor B OUT
‘
All connected to B circuit
CAUTION
Summary of Contents for PATX13A0E
Page 18: ...18 AHU EXPANSION KIT ...
Page 19: ......
