Operating
25
Oper
ating
3
Radio Operations
Be sure that both FM and AM antenna are
connected. (Refer to the page 16)
Listening to the radio
1. Press
FUNCTION
until FM or AM appears in the
display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING-/+
on the remote
control or
Y/U
on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Manual tuning :
Press
TUNING-/+
on the remote control or
Y/U
on the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing
VOL +/-
on the remote
control repeatedly.
Improving poor FM reception
Adjust the antenna to improve the reception when
the radio has poor reception.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press
FUNCTION
until FM or AM appears in the
display window.
2. Press
TUNING-/+
on the remote control or
Y
/
U
on the unit to select a desired
frequency.
3. Press
PROGRAM/MEMORY
. A preset number
will blink in the display window.
4. Press
PRESET·FOLDER
W
/
S
to select the
preset number you want.
5. Press
PROGRAM/MEMORY
.
The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER
W
/
S
or
0
to
9
numerical buttons.
Deleting all the saved stations
1. Press and hold
PROGRAM/MEMORY
for two
seconds.
“ERASEALL” will flash up on the unit display.
2. Press
PROGRAM/MEMORY
to erase all the
saved radio stations.
OM5542-AB_DARELLK_ENG_8770.indd 25
2015-06-02 �� 12:25:42
