LG OLED65GXPDA, Owner'S Manual

Page: 11 / 48

11
ENGLISH
_inde
x
After Installation
• When connecting additional cables from the sides, we
recommend holding the centre of the TV horizontally or
vertically and pulling the product to make sure there is
sufficient distance from the wall before connecting.
• When connecting additional cables from the bottom, we
recommend releasing the TV from the wall mount before
connecting.
• Use cable management systems to arrange the
cables at the bottom of the TV as shown below. Cable
managements are not provided with the product, so
purchase them separately.
(For example)
• After installing the product, be sure to use it adhered to
the wall.
-
Using the product while it is not adhered to the wall
may damage or shake the product.
Connections
You can connect various external devices to the TV. For more
information on external device’s connection, refer to the manual
provided with each device.
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to
the following. The illustrations may differ from the actual items and an
RF cable is optional.
•
Make sure not to bend the copper wire of the RF cable.
Copper wire
•
Complete all connections between devices, and then connect the
power cord to the power outlet to prevent damage to your TV.
•
To improve the picture quality in a poor signal area, purchase a
signal amplifier.
•
Use a signal splitter to use 2 TVs or more.
•
If the antenna is not installed properly, contact your dealer for
assistance.
•
DTV Audio Supported Codec (Depending upon country): MPEG,
AAC, HE-AAC, Dolby Digital, Dolby Digital Plus
•
This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts
directly because the related standards have not been confirmed.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.