7
!"#$%&'
()*+,
-
Mounting on the Table
1 Lift and tilt the TV into its upright position on a table.
Ţ
Leave a minimum of 10 cm (4 inches) space from the wall for
proper ventilation.
10 cm
10 cm
10 cm
10 cm
10 cm
(4 inches)
(Depending upon model)
2 Connect the power cord to a wall outlet.
t Do not apply foreign substances (oils, lubricants, etc.) to
the screw parts when assembling the product. (Doing so
may damage the product.)
t If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the
product may fall over, which may cause injury.
t Do not use any unapproved items to ensure the safety
and lifespan of the product.
t Any damages or injuries by using unapproved items are
not covered by the warranty.
t Make sure that the screws are fastened tightly. (If they
are not fastened securely enough, the TV may tilt forward
after being installed.)
t When installing on a cabinet or a shelf using a stand,
make sure its width is greater than that of the TV.
t Do not fasten the screws with excessive force otherwise
they may strip and become loose.
Securing TV to the Wall
(Depending upon model)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
Ţ
If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the
location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or
cable. Make sure to keep the rope parallel to the flat surface.
Ţ
Use a platform or cabinet that is strong and large enough to
support the TV securely.
Ţ
Brackets, bolts and ropes are optional. You can obtain additional
accessories from your local dealer.
Value Electronics
Authorized LG Dealer
www.ValueElectronics.com
