background image

6

 

 Preparing

Lifting and moving the TV

Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

 

It is recommended to move the TV in the box or packing material that the TV originally came in.

 

Before moving or lifting the TV, disconnect the power cord and all cables.

 

When holding the TV, the screen should face away from you to avoid damage.

 

Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, 
speaker, or speaker grill area.

 

When transporting a large TV, there should be at least 2 people.

 

When transporting the TV by hand, hold the TV as shown in the following illustration.

 

When transporting the TV, do not expose the TV to jolts or excessive vibration.

 

When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.

 

Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.

 

When handling the TV, be careful not to damage the protruding buttons.

 

Avoid touching the screen at all times, as this may result in damage to the screen.

 

When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from 
scratches.

Summary of Contents for OLED55G16LA




























Reviews: