LG OLED55C7BO.ATR, Manual

Page: 16 / 33

8
Troubleshooting
Cannot control the TV with the remote control.
•
Check the remote control sensor on B&O sound center box and try
again.
•
Check if there is any obstacle between B&O sound center box and the
remote control.
• Check if the batteries of B&O remote are still working and properly
installed ( to , to ).
No image display and no sound is produced.
• Check if the product is turned on.
•
Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the Sleep Timer / Timer Power Off is activated in the
Timers
settings.
• Check if the Auto Power Off is activated in the General Eco
Mode
settings. (Depending on model)
• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), ‘
No signal
’ or ‘
Invalid Format
’ is
displayed.
•
Turn the TV off/on using the remote control.
•
Reconnect the HDMI cable.
•
Restart the PC with the TV on.
Abnormal Display
• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•
This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (white, red,
blue or green) at a size of 1 ppm on the panel. This does not indicate
a malfunction and does not affect the performance and reliability of
the product.
This phenomenon also occurs in third-party products and is not
subject to exchange or refund.
•
You may find different brightness and color of the panel depending
on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is
not related with the product performance, and it is not malfunction.
• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for a
long period of time.
•
Some horizontal lines may appear when the Pixel Refresher feature is
performed. It is normal and there is no need to be concerned.
Generated Sound
•
“Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due to
temperature and humidity. This noise is common for products where
thermal deformation is required.
• Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large
amount of current to operate a product. It varies depending on the
product.
This generated sound does not affect the performance and reliability
of the product.
ENGLISH