Operating
48
Oper
ating
4
CHILDSAFE Mode
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold
OK
on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold
OK
on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
In case of USB or BT (
Bluetooth
) function,
CHILDSAFE mode does not work after about
2 minutes from power on the unit even if this
mode is enabled.
,
Note
Last Scene Memory
r
This unit memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Power Resume - Optional
r
Even if the power suddenly goes out, turn on the
unit and then it plays a position where the contents
is being played. System will periodically save current
playback status.
System Select - Optional
You must select the appropriate system mode for
your TV system. Press and hold
M
on the remote
control for more than five seconds to be able to
select a system in the
[Home Menu]. (NTSC
PAL)
If the USB device is connected or a disc is
inserted, this function is not operated.
,
Note
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by pressing
MIC VOL -/+
on the remote control or rotating
MIC VOL. -/+
clockwise or counterclockwise on the unit .
y
When not using the microphone, set the MIC
volume to minimum or turn off the MIC and
remove the microphone from the MIC jack.
y
If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the
MIC VOL -
on the remote control or
MIC VOL. -/+
on the unit.
y
If sound through the microphone is extremely
loud, it may be distorted. In this case, set the
microphone volume by pressing
MIC VOL -
on the remote control or rotating
MIC VOL. -/+
on the unit.
y
You can give an echo effect to the sound
from the microphones by pressing
MIC ECHO
.
,
Note
Summary of Contents for OL90DK
Page 65: ......
