Operating
14
Oper
ating
2
Radio Operations
Antenna Connection
Connect the FM wire antenna to FM antenna
connector.
Listening to the Radio
1. Press
P
FUNCTION
or
P
repeatedly until FM
appears in the control panel. The last received
station is tuned in.
2. Auto tuning : Press
/
for about 2 seconds
until the frequency indication starts changing,
then release. Scanning stops when the unit
tunes in a station.
Manual tuning : Press
/
repeatedly.
3. Adjust the volume by pressing
-/+
(Volume).
Presetting the Radio Stations
You can store up to 10 FM preset stations.
Before tuning, make sure that you have turned
down the volume.
1. Press
P
FUNCTION
or
P
repeatedly until
FM appears in the control panel.
2. Select the desired frequency by using
/
.
3. Press
MEMORY
. A preset number will blink in
the control panel.
4. Press
PRESET
W
/
S
to select the preset number
you want.
5. Press
MEMORY
. The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Press
PRESET
W
/
S
to select a preset station.
Deleting All the Saved
Stations
Press and hold
MEMORY
for two seconds. “CLR” will
flash up. Press
MEMORY
again. Then all the saved
stations are deleted.
•
If all stations have already been preset,
“FULL” will appear in the control panel for
a moment and then a preset number will
blink.
•
Although all stations were preset, you can
preset a station by overwriting the previous
station.
•
You cannot delete the preset stations one
by one.
,
Note
Improving Poor FM Reception
Press
. This will change the tuner from stereo to
mono and usually improve the reception.
ND5521-FC.BDEULLK_ENG.indd 14
12. 10. 10. �� 1:41