background image

CAR CD/MP3/WMA Receiver

9

For Light setting

You can adjust the light effects by adjusting LED, DIM, or DIM L.  

DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the dis-
play window during the power-on status. When you set DIMMER to AUTO,
the dimmer operates according to the car dimmer setting.

DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dim-
mer level. (-2,-1,0,+1,+2)

For Other setting

AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.

BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.

A-EQ(Auto EQ) ON/OFF 

AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automati-
cally selected according to the music genre. 

SW(Subwoofer) OFF / SW 55 Hz / SW 85 Hz / SW 120 Hz
You can enable the subwoofer.  
SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz.

DEMO OFF/ ON 
You can change the initial indication on the display to information name (func-
tion name,  EQ name, etc...) while listening to a source.

CLK(Clock) 
For the model RDS is not supported or even for a RDS supported unit, when
RDS CT information is not received and then you set CT on the setting menu
to OFF, you can adjust the time by yourself. Refer to the page 11 for setting
the CT(Clock Time) ON/OFF.

Listening to a CD - more you can do

Pausing or restarting CD playback

1. Press 

B

B[]

on the player during playback. 

2. Press it to resume playback.

Searching for a section within a track / file 

1. During playback, press 

b?

or 

+

?B

on the player for longer than 1 second and

then release.

2. Press 

B

B[]

on the player again at the point you want.

Skipping to another track/ file

Press 

b?

or 

+

?B

on the unit. 

Or

1. Press the volume knob.
2. Rotate the volume knob on unit to select a desired track or file. 
3. Press the volume knob to start playback. 

Note

To skip to previous track, press briefly 

b?

-

within 3 seconds of playing time.

Checking information about your music

MP3/WMA files often come with tags. The tag gives the Title, Artist or Album. 
Press 

DISP

repeatedly during MP3/WMA/CD TEXT file playback. If there is no

information, “NO TEXT” will be shown in the display window.

Listening to a CD

ON PLAYER

1. Insert a CD.

2. Adjust the volume.

-

Rotate the    

volume knob

Summary of Contents for NCS400UR

















Reviews: