LG NB2530A, Owner'S Manual

Page: 14 / 26

Operating 14
Oper
ating
3
AUTO POWER On/Off
Before operating this function, make sure that you
have selected OPTICAL IN and turn on the AUTO
POWER.
This function automatically turns on/off the unit
when you turn on/off the external device (TV, DVD
Player, Blu-ray Disc Player, etc.) connected to this
unit by the optical cable.
When turning on the unit by this function, Optical
function is selected directly no matter what kind of
function has been selected before turning off it.
This function turns on or off each time you press
AUTO POWER
.
Display Operation
AUTO POWER ON
AUTO POWER function is
turned on.
AUTO POWER OFF
AUTO POWER function is
turned off.
y
This function is intentionally designed to
turn off the unit after 1 minute of inactivity.
If you did not connect external devices with
optical cable or there is no digital audio
signal going to the unit, the unit will turn off
after 1 minute of inactivity if AUTO POWER
function is turned on.
y
Depending on the connected device by the
optical cable, this function may not operate.
y
Once AUTO POWER is set, the unit will
start as OPTICAL mode automatically next
time, no matter what kind of function you
selected before.
y
It is not available to turn on the unit by
AUTO POWER function if you turn off the
unit directly.
y
AUTO POWER function is not supported on
LG Sound Sync (Wireless) mode.
,
Note
Auto power down
This unit will turn off itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit has
been connected to other device using analogue
input.
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
Sleep timer setting
Press
SLEEP
repeatedly to select the desired time
period options (in minutes):
LCD OFF (Display window off ) -> DIMMER (The
display window will be darken by half ) -> Sleep
timer value -> Display on
In display window you see “LCD OFF” and the
display window turns off .
To check the remaining time, press
SLEEP .
To cancel the sleep function, press
SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP
once again while “SLEEP 10” is displayed.
You can check the remaining time before the
unit turns off . Press
SLEEP the remaining time
appears in the display window.
,
Note
NB2530A-NB_DGBRLLK_ENG_2477.indd 14 2013-10-30 10:17:59