background image

Getting Started

Getting Started

2

Ge
tting S

tar

ted

1

Safety information

CAUTION

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

CAUTION:

 TO REDUCE THE RISK OF ELECTRIC 

SHOCK DO NOT REMOVE COVER (OR BACK) NO 

USER-SERVICEABLE PARTS INSIDE REFER SERVICING 

TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with 
arrowhead symbol within an 
equilateral triangle is intended to 
alert the user to the presence of 
uninsulated dangerous voltage 
within the product’s enclosure 
that may be of sufficient 
magnitude to constitute a risk of 
electric shock to persons. 
The exclamation point within an 
equilateral triangle is intended 
to alert the user to the presence 
of important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the product.

WARNING:

 This product contains chemicals known 

to the State of California to cause cancer and birth 
defects or other reproductive harm. 

Wash hands 

after handling.

WARNING:

 TO PREVENT FIRE OR ELECTRIC SHOCK 

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN 
OR MOISTURE.

WARNING:

 Do not install this equipment in a 

confined space such as a book case or similar unit.

CAUTION:

 Do not block any ventilation openings. 

Install in accordance with the manufacturer’s 
instructions. 
Slots and openings in the cabinet are provided for 
ventilation and to ensure reliable operation of the 
product and to protect it from over heating. The 
openings shall be never be blocked by placing the 
product on a bed, sofa, rug or other similar surface. 
This product should not be placed in a built-
in installation such as a bookcase or rack unless 
proper ventilation is provided or the manufacturer’s 
instruction has been adhered to.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon 
a dedicated circuit; 
That is, a single outlet circuit which powers only 
that appliance and has no additional outlets or 
branch circuits. Check the specification page of this 
owner’s manual to be certain. Do not overload wall 
outlets. Overloaded wall outlets, loose or damaged 
wall outlets, extension cords, frayed power cords, or 
damaged or cracked wire insulation are dangerous. 
Any of these conditions could result in electric 
shock or fire. Periodically examine the cord of your 
appliance, and if its appearance indicates damage 
or deterioration, unplug it, discontinue use of the 
appliance, and have the cord replaced with an 
exact replacement part by an authorized service 
center. Protect the power cord from physical or 
mechanical abuse, such as being twisted, kinked, 
pinched, closed in a door, or walked upon. Pay 
particular attention to plugs, wall outlets, and 
the point where the cord exits the appliance. To 
disconnect power from the mains, pull out the 
mains cord plug. hen installing the product, ensure 
that the plug is easily accessible.

This device is equipped with a portable battery or 
accumulator. 

Safety way to remove the battery or the 

battery from the equipment: 

Remove the 

old battery or battery pack, follow the steps 
in reverse order than the assembly. To prevent 
contamination of the environment and bring on 
possible threat to human and animal health, the 
old battery or the battery put it in the appropriate 
container at designated collection points. Do 
not dispose of batteries or battery together with 
other waste. It is recommended that you use 
local, free reimbursement systems batteries and 
accumulators. The battery shall not be exposed to 
excessive heat such as sunshine, fire or the like.

CAUTION:

 The apparatus shall not be exposed to 

water (dripping or splashing) and no objects filled 
with liquids, such as vases, shall be placed on the 
apparatus.

Summary of Contents for NB2520A



























Reviews: