20
MultiSITE MS8000 Series Room Controllers
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp.
Return to Home Screen
1/2 Setup
Network
Configuration
Setpoints - Display
Service View
Test Outputs
Language Selection
How to Enter the Set-up Screen
Figure 13: Entering the Set-up Screen.
Nonadjustable Parameter
• If a configuration/installer password is activated to prevent unauthorized access
to the configuration menu parameters, a password entry prompt shows to prevent
access to device configuration components.
• For more information on using and configuring the functions of the HMI, refer to
the LG MultiSITE MS8000 Series Room Controller User Manual.
Enter BACnet
®
and ZigBee
®
Network Settings
Enter Parameter Configuration Menu
Enter Setpoint and Display Settings
Enter Output Testing Mode
Enter Status and Service View
Enter Language Selection
SET-UP SCREEN FOR MS8350 AND MS8650
Figure 14: Set-up Screen Display.
Adjustable Parameter
Touch and hold this point for three
(3) seconds to enter set-up mode.