LG MSB-100 User Manual Download Page 11

 

              Page 11  

 

transmitting radio frequency (RF) electromagnetic fields (microwaves) in the frequency 

range 2.4 to 2.4835 GHz. The output power of the radio transmitter is low, 0.001 watt. Your 

Bluetooth Stereo Speaker is designed to operate in compliance with the RF exposure 

guidelines and limits set by national authorities and international health agencies when 

used any compatible LG Electronics mobile phone. 

2.  Potentially explosive atmosphere 

Turn off your electronic device when in any area with a potentially explosive atmosphere. It 

is rare, but your electronic device could generate sparks. Sparks in such areas could 

cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially 

explosive atmosphere are often, but not always, clearly marked. 

3. Emergency 

calls 

IMPORTANT! 

This Bluetooth Stereo Speaker and the electronic device connected to the Stereo Speaker 

operate using radio signals, cellular and landline networks as well as user-programmed 

functions, which cannot guarantee connection under all conditions. Therefore you should 

never rely solely upon any electronic device for essential communications (e.g. medical 

emergencies).  

Remember, in order to make or receive calls, the Stereo Speaker and the electronic device 

connected to the Stereo Speaker must be switched on and in a service area with adequate 

cellular signal strength. Emergency calls may not be possible on all cellular phone 

networks or when certain network services and/or phone features are in use. Check with 

your local service provider. 

4. Battery 

information 

A rechargeable battery has a long service life if treated properly. A new battery or one that has not 

been used for a long period of time could have reduced capacity the first few times it is used. Do not 

expose the battery to extreme temperatures, never above +60°(+140°F) or under -20°(-4°F). For 

maximum battery capacity,   use the battery in room temperature. If the battery is used in low 

temperatures, the battery capacity will be reduced. The battery can only be charged in temperatures 

b10° (+50 °F) and +45° (+113°F). 

5.  Recycling the battery in your Bluetooth Stereo Speaker 

The battery in your Bluetooth Stereo Speaker must be disposed of properly and should never be 

placed in municipal waste. The LG Electronics service partner removing battery will dispose of it 

according to local regulations. 

6. Conditions 

z

 

The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the 

date of purchase and serial number, is presented with the product to be repaired or replaced. LG Electronics 

reserves the right to refuse warranty service if this information has been removed or changed after the 

original purchase of the product from the dealer. 

Summary of Contents for MSB-100



















Reviews: