background image

22

TROUBLESHOOTING

ENGLISH

Problem

Possible causes

Corrective action

The air-condi-
tioner stops dur-
ing operation.

• The air conditioner is suddenly

turn off.

• The timer function could be oper-

ated. If the timer function would op-
erate, the air-conditioner can be turn
off. 

• Check the timer setting is correct.

• A power failure has occurred dur-

ing operation.

• There is the Auto Restart Function.

It is a default setting. 

• This function can turn on the unit

automatically when the power is re-
stored. 

• If you live in frequent power failure

area, this function would be useful.

Indoor unit is still
operating even
when the power
is being turned
off.

• Auto-Clean mode is being oper-

ated.

• This function is to remove the

rest of moisture indoor unit.

• Please, wait until the end of func-

tions.

• It will be inhibit a fungal growth.

If you do not want this feature, you
can turn off to press .

Mist is discharged
from the air outlet
of the indoor unit.

• The cooled air from the air condi-

tioner  makes mist.

• When the room temperature is

down, this phenomenon will disap-
pear.

Water leaks from
the outdoor unit.

• In the heating operations, con-

densed water drop from the heat
exchanger.

• This symptom need to install drain

hose under the base pan.

• Contact the installer.

Operating noise
or vibration.

• Clicking sound 

Clicking sound can be heard ei-
ther when the unit starts or stops
due to movement of reversing
valve.

• Creaking sound

The plastic parts of the indoor
unit make sound of shrinks and
expands due to a sudden temper-
ature change.

• The water flowing sound, Blow-

ing sound

The flow of refrigerant through
the air conditioner is switching,
noise can be heard.

• These are normal symptoms.

• After a moment, it will be silent.

The indoor unit
gives out odor.

• The air smells bad because a

musty or cigarettes odor may be
absorbed into the indoor unit and
discharged with airflow.

• If the smell does not disappear, you

need to wash filter or heat ex-
changer.

• Contact the installer.

1,MFL67870308,영영  17. 7. 19.  영영 9:30  Page 22

Summary of Contents for MS05SQ
























Reviews: