LG MR20GA, Quick Start Manual

Page: 5 / 56

5
ENGLISH
_Inde
x
USING
1. How to register (pair) or deregister (unpair)
How to register (pair) the Magic Remote
To use the Magic Remote, first pair it with your TV.
1. Put batteries into the Magic Remote and turn the TV on.
2. Point the Magic Remote at your TV and press the
Wheel (OK) on the remote control.
-
If the TV fails to register the Magic Remote, try again after
turning the TV off and back on.
How to deregister (unpair) the Magic Remote
Press and hold the (HOME) and / buttons at
the same time for five seconds, to unpair the Magic Remote
with your TV.
-
Press and hold the / button for more than 5
seconds to disconnect and re-register the Magic Remote
at the same time.
2. How to use
• Shake the Magic Remote slightly to the right and left or
press
(HOME)
,
(INPUT)
, or
(Q. Settings)
buttons to make the pointer appear on the screen.
(In some TV models, the pointer will appear when you
turn the
Wheel (OK) button.)
• If the pointer has not been used for a certain period of
time or Magic Remote is placed on a flat surface, then
the pointer will disappear.
• If the pointer is not responding smoothly, you can reset
the pointer by moving it to the edge of the screen.
• The Magic Remote depletes batteries faster than a
normal remote due to the additional features.