background image

5

Included in the Box

The MP700 comes with the following components. Please check that these components have been included 
prior to installation.

The following items are supported by the MP700, but are not provided with the product.

Please purchase optional items as needed.

● DP (DisplayPort) cable, LINE-OUT (Audio Out) cable, LAN cable, mouse, keyboard.

● 

These illustrations may differ from your product and are subject to change.

 

In some countries, a Y-type cable may be provided instead of the power cord.

  

Always use genuine components to ensure safety and product life. Any damages or injuries by misuse or 

using an improper accessory are not covered by the warranty.

Attention

M 3.0 mm x Pitch 0.5 mm x 

Length 6.0 mm X 4ea

MP700

Power Cable

Owner's Manual / Cards

Basic Components

Optional Items

  SuperSign software and manual. 

- Downloading from the LG Electronics website.

 

-  Visit the LG Electronics website (

http://www.lgecommercial.com/supersign

) and download the latest soft

-

ware for your model. 

(Depending on the model, this feature may not be supported.)

Note

Summary of Contents for MP700
























Reviews: