SMART DIAGNOSIS (Only for applied models)
18
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
Be aware!
Difference of the regional call qualities may have influence on the function.
If you use home phone, better communication performance will enable much better service.
Smart diagnosis data transmission may not be fluent due to call quality problem, and in such case, smart
diagnosis service may be difficult.
How to use the function
1. Open the refrigeration door
2. Press Fridge Temp control button 3sec or
more.
3. If the buzzer sounds 4 times, Open the Freezer
door and place the phone near the speaker
hole.
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed, along
with the display of the data transmission
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.
w
CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
