background image

7

• Install the limit stops to the upper corners 

  on the rear wall of the refrigerator as shown 

  in Fig.1. The stops are supplied in the door 

  basket inside the refrigeration compartment; 
• Choose the suitable place. Locate the 

  refrigerator in a place convenient for its 

  use; 
• The refrigerator is not a built-in appliance. 

  Free space not less than 5 cm should be 

  provided from above, from its rear and side 

  faces for air circulation and reduction of 

  power consumption. Fig.2; 
• Do not install the refrigerator near heat 

  sources and in a zone exposed to direct 

  sunlight or high humidity;
• Make sure that electrical voltage indicated 

  in the manual meets the parameters of 

  your mains; 
• Do not remove the round stickers on the 

  rear side of the refrigerator. 

  They have a decorative function closing 

  the fabrication holes; 
• To exclude vibration, check the refrigerator 

  installation using a level. If necessary, turn 

  the adjustable feet to compensate irregularity 

  of the floor. 

  To ensure better closing of the door, the 

  refrigerator should be slightly inclined 

  backwards. To turn the adjustable feet, 

  slightly incline the refrigerator. 

• Before use, carefully wash the refrigerator; 
• Install the removable parts, such as ice tray, 

  etc. to the appropriate places. 

  It is necessary to prevent possible damages 

  during transportation; 

• Insert the power cord plug to the power 

  outlet. Do not power other electric appliance 

  from the same outlet.

After first installation of the refrigerator, let it 

work for 2-3 hours for stabilization of the 

operating temperature inside and only then 

fill the refrigerator with fresh or frozen 

foodstuffs. After disconnection of the 

refrigerator from the mains, wait at least 5 

minutes to switch on it again. Now, the 

refrigerator is ready for service. 

Figure 1. Installation of limit stops 

Figure 2. Installation of refrigerator to wall 

forward

backward 

The limit stops are located in the door basket of 

the refrigeration compartment.  
They should be installed to get higher operational 

efficiency of the refrigerator.  

NOTE

 CONNECTION 

Summary of Contents for MFL67783510






















Reviews: