5
- Decide 'Max Volume' between changing range 0~100 .
- When 'Max Volume' is set, user can change up to set volume value .
- When 'Max Volume' is set, volume just goes up to the 'Max Volume’ value in 'On Time Menu’ .
(10) Max Volume
- Decide whether work the LG remote control or not .
- Set to Yes(Work) or No(Do Not Work) .
- When ‘LG IR Operation’ is set to NO(Not Work), all keys don’t work .
- Although set to No, it can work in Service mode .
- Although set to No, Home key action to enter the ‘Installation Menu’ and key action to enter Password
are available .
- When ‘LG IR Operation’ is set to Yes(Work), all keys are available .
(8) LG IR Operation
(9) Local Key Operation
- Decide to operate 'Local Key' or not by setting “Local Key Operation" as Yes(Work) or No(Do Not
Work) .
- When 'Local Key Operation' is set to No(Do Not Work), all Local Key doesn't work except volume up/
down key and power key .
- When 'Local Key Operation' is set to No(Do Not Work), Local Key working in service mode is still avail-
able .
- When 'Local Key Operation' is set to Yes(Work), all Local Key working is available .
- When set both 'Local Key' and 'Remocon Operation’ as No(Do Not Work), Power key of Remocon work
as exceptional case .
- Even when the local key operation is set to No, when you press the local key for 5 seconds, the Home
key will operate to access the Installation Menu .
- Exception : In case of the commercial model, although both IR and Local key operation are set to 'No'
(no operation), you can operate the /- key and the power key .
It is a mode to set whether to update dtv channel automatically or not .
When DTV Channel Update is set to ’Auto’, the function to update TV’s programme map according to
dtv programme’s stream information .
DTV Channel Update is set to ‘Manual’, the function to keep TV’s programme map even though dtv
programme’s information is changed .
(11) DTV Channel Update
- Set whether it is turned on by the set input source or by the last stored input source .
- It is turned on by the Last Memory Input if the Input source is turned off .
- It is turned on by the Last Pr . If the Input source is turned off and the Last Memory Input is the RF .
- All sources supported by the said model can be set as Input source . (The Input source value should
be rotated .)
- If both the Input source and the ON TIME are set, the Input source takes the priority .
- If the DTV/Radio Channel does not exist at the map, the DTV/Radio is skipped while navigating .
- When the Input source is changed to the DTV/Radio, the Programme No . is set to the first programme
of the Channel map of the DTV/Radio .
- When the Input source is changed to the ATV, the Programme No . is set to 0 . (If the channel map
structure does not support this, it follows the structure of the said model .)
(12-1) Input Source
- Set the channel to display and Volume Level, etc . when turn on power in AC Power On or Stand-by
status .
- Set to Yes(Work) or No(Do Not Work) .
- When ‘Power On Default’ is set to No, it is not applied to the subordinate Programme, Volume, A/V
Setting menu .
- When Power On Default is set to Yes, it can set by entering the subordinate menu .
(12) Power On Default
