This feature, known as Call waiting, is only available if
your network supports it. For details of how to activate
and deactivate it see Call waiting (Menu 9.5.4)
If Call waiting is on, you can put the first call on hold and
answer the second, by pressing
.
Rejecting an Incoming Call
You can reject an incoming call without answering by
simply pressing the
key.
During a call, you can reject an incoming call by pressing
the key.
Muting the Microphone
You can mute the microphone during a call by pressing
the [Options] key then selecting [Mute]. The handset can
be unmuted by pressing the [Unmute]. When the handset
is muted, the caller cannot hear you, but you can still
hear them.
DTMF tones while calling
To switch on DTMF tones while calling (e.g. to use the
phone with an automatic switchboard) press the key
[Options] followed by Send DTMF - DTMF on. Select
DTMF off to disable DTMF tones. DTMF tones are
normally on.
Conference Calls
The conference service provides you with the ability to
have a simultaneous conversation with more than one
caller, if your network service provider supports this
feature. A conference call can only be set up when you
have one active call and one call on hold, both calls
having been answered. Once a conference call is set up,
calls may be added, disconnected or separated (that is,
removed from the conference call but still connected to
you) by the person who set up the conference call. These
options are all available from the In-Call menu. The
maximum callers in a conference call are five. Once
started, you are in control of the conference call, and only
you can add calls to the conference call.
In-Call Menu
In-Call Menu
30
