Operating
25
Operating
3
Dubbing USB to USB
You can do dubbing a various sound source in
USB1
to
USB2
on
USB
function.
1. Connect a USB device including desired sound
fi les to
USB1
.
2. Connect an USB device to
USB2
.
3. Press
REC. TO USB 2
on the unit or
X
REC
on
the remote control.
4. To stop recording, press
I
on the unit or
Z
ENTER
on the remote control.
Pausing recording
During recording, press
REC. TO USB2
on the
unit or
X
REC
on the remote control to pause
recording. Press it again to restart recording. (Only
Radio/ AUX/ Portable)
You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
During recording MP3/ WMA, there is no
sound.
When you stop recording during playback,
the fi le that has been recorded at that time
will be stored. (AUDIO CD Only)
Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete fi le may be made and not
deleted on PC.
If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
Multi card reader device or External HDD
can not be used for USB recording.
A fi le is recorded by about 512 Mbyte when
you record for a long term.
When you stop recording during playback,
the fi le will not be stored.
You may not store more than 999 fi les.
It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : TUNER, AUX, Portable and the like.
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs, fi les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal off ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Summary of Contents for MCD606
Page 10: ...Getting Started 10 Getting Started 1 Front panel ...
Page 31: ...Appendix 31 Appendix 5 ...
Page 32: ......
