17
Operation
4
Operation
Synchronized Recording from CD to
Tape
1.
Open the tape deck and then insert a blank
tape.
2.
Close the door and insert a CD.
> Audio CD only
3.
Select CD function.
4.
Press
zB
on a stop status to move to CD
synchronizing mode.
> The synchronized recording is started
automatically after about 7 seconds .
5.
To stop recording, press
x
Z
.
Recording to USB
You can record a various sound source to USB.
1.
Connect the USB device to the unit.
2.
Select a function in which you want to
record playback a sound source fi rst.
[One tracks recording]
You can record to USB after playing the fi le
you want. (CD Only )
[All tracks recording]
You can record to USB after stopping.
(CD Only )
[Program list recording]
After moving to the programmed list and
you can record it to USB. (CD Only )
3.
Start the recording by pressing
z
REC
4.
To stop recording, press
x
.
Pausing recording
During recording, press
z
REC (R)
to pause
recording.
Press
z
REC (R)
to continue recording.
(Only Radio/ AUX/ TAPE)
To select recording bit rate and speed
1.
Press
z
REC
for longer than 3 seconds.
2.
Use
. m
or
M >
to select the bit
rate.
3.
Press
z
REC
again to select the recording
speed.
4.
Use
. m
or
M >
remote control
to select a desired recording speed.
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music fi le.
5.
Press
z
REC
to fi nish the setting.
The making of unauthorized copies of
copy-protected material, including computer
programs, fi les, broadcasts and sound recordings,
may be an infringement of copyrights and constitute
a criminal off ense. This equipment should not be
used for such purposes.
Be responsible
Respect copyrights
MCD65,35_EVENT_ENG.indd 17
MCD65,35_EVENT_ENG.indd 17
10. 07. 28
2:52
10. 07. 28
2:52