7
Operation
USB Function - OPTIONAL
You can enjoy MP3/WMA media file saved on
MP3 player or USB memory device by connect-
ing the device to the USB port of this unit.
Compatible Devices
1. Devices which require additional program
installation when you have connected it to a
computer, are not supported.
2. MP3 Player : Flash type MP3 player.
•
The MP3 player requiring installation of a driver
is not supported.
3. USB Flash Drive : Devices that support
USB2.0 or USB1.1.
Basic Playback
1. Connect the USB device to the USB con-
nector of your unit.
2. Press
USB
to select USB function.
“CHECKING” appears in the display window,
and then the total number of files is dis-
played.
3. Press
PLAY/PAUSE (
B
B
/
[[]]
)
.
In addition, you can also play using the
NUMERIC
buttons.
To Remove the USB from the unit
1. Choose an other function except USB
in order to remove the USB.
2. Remove the USB from the unit.
Note:
Besides Basic Playback, if you want to operate
other functions, see the CD Playback section.
Moving to other cards
In the case that more than two memory cards
are connected to the USB port, press
D.SKIP
on
the remote control to select a cards you want to
use.
Notes:
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub,
the USB device might not be recognized.
• A device using NTFS file system is not
supported (Only the FAT (16/32) file system is
supported.).
• The USB function of this unit does not support
all USB devices.
• Digital camera and mobile phones are not
supported.
• This unit is not supported when the total
number of files is 1000 or more.
About MP3/WMA
MP3/WMA Disc compatibility with this unit is
limited as follows:
1. Sampling Frequency
8 - 48kHz(MP3), 32 - 48kHz(WMA)
2. Bit rate
8 - 320kbps(MP3), 48 - 320kbps(WMA)
3. CD-R physical format should be “ISO 9660”
4. If you record MP3/WMA files using the soft-
ware which cannot create a FILE SYSTEM,
for example “Direct-CD” etc., it is impossible
to playback MP3 files. We recommend that
you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
5. File names should be named using 30 let-
ters or less and must incorporate
“.mp3”,“.wma” extension e.g. “********.MP3”
or “********.WMA”
6. Do not use special letters such as
“/ : * ? “ < >”etc.
7. Even if the total number of files on the disc
has more than 1000, it will only be shown
up to 999.
About MULTI SESSION
- This function recognizes the multi session disc
according to a disc of CD-ROM type.
ex) If there are MP3/WMA files in the first ses-
sion, the MP3/WMA file in the first session
are only played.
If there are only MP3/WMA files in the
whole session, all of the MP3/WMA files in
the session are played.
If there is an Audio CD in the first session,
only the Audio CD in the first session is
played.
Operation
USB Memory, MP3 Player
(or Memory Card Reader,
etc.)
