LG MBD-K102Q, Owner'S Manual

Page: 10 / 31

10
Setting the Clock
1. Press CLOCK.
2. Select a 24 hour time system or a 12 hour time
system by pressing
.
/
>
.
3. Press SET to confirm the selected hour time
system.
4. Press . / > on the front panel to set the
correct hours.
5. Press SET.
6. Press
. / > on the front panel to set the
correct minutes.
7. Press SET and the correct time is shown on the
display window.
8. Press CLOCK at any time to display the time for
about 5 seconds.
Note:
If you want to reset the clock, press and hold CLOCK
for more than 2 seconds.
Timer Function
With the TIMER function, you can have the radio
reception, CD play and USB play turned on and off at
the desired time.
1. Press CLOCK to check the current time.
(If you don’t set clock, the timer function doesn’t
work.)
2. Press TIMER to enter the timer setting mode. If
you want to correct the previous memorized
TIMER setting, press and hold the TIMER for
more than 2 seconds.
- The previously memorized timer on the time and
“ ” indicator appears in the display window.
3. Each function (TUNER
→
DVD/CD
→
USB)
flashes in the display window in turn. Press SET
when the desired function is flashing.
4. a. When you select the TUNER function, select
the previously memorized preset number by
pressing
.
/
>
on the front panel and
press SET.
- “ON TIME” indicator appears for about
0.5 seconds in the display window and
then disappears.
b. When you select the DVD/CD or USB function,
- “ON TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
5. Set the hour to switch on by pressing
.
/
>
on the front panel.
6. Press SET.
7. Set the minute to switch on by pressing
.
/
>
on the front panel.
8. Press SET.
- “OFF TIME” indicator appears for about 0.5
seconds in the display window and then
disappears.
9. Set the hour to switch off by pressing . / >
on the front panel.
10. Press SET.
11. Set the minute to switch off by presssing
. / > on the front panel.
12. Press SET.
13. Adjust the volume level by pressing
. / > on
the front panel.
14. Press SET.
“ ” appears in the display window and the timer
setting has been completed.
15. Switch the system off.
The selected function is automatically switched on
and off at the time set.
To cancel or check the timer
Each time the TIMER is pressed you can select the
timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER that
“ ” appears in the display window.
To cancel the TIMER, press the TIMER that “ ”
disappears in the display window.
Note:
• If you insert the DVD,VCD or DivX except audio
CD/MP3/WMA on the unit, the timer function will be
operated to the TUNER.
• This is not supported in the multi card reader.
Sleep Timer Function
When the sleep timer is used, the power is
automatically turned off after the specified time has
elapsed.
1. Press SLEEP to set the desired sleep time.
The SLEEP indicator and sleep time appears in
the display window.
2. Each time you press SLEEP the setting changes
in the following order.
SLEEP 180 (minutes)
→
150 (minutes)
→
120
(minutes)
→
90 (minutes)
→
80 (minutes)
→
70 (minutes)
→
60 (minutes)
→
50 (minutes)
→
40 (minutes)
→
30 (minutes)
→
20 (minutes)
→
10 (minutes)
→
OFF (No display)
Note:
If you press SLEEP while the sleep time is
displayed, the SLEEP time is reset.
To cancel the sleep timer mode
If you have to stop the function, press the SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
(12HR)
(24HR)
or