background image

Troubleshooting

18

T

roubleshoo

ting

4

Troubleshooting

Symptoms Cause

Solution

Power doesn't turned on.

The unit doesn't operate.

Leads and connectors are not properly.

Confi rm once more that all connections are correct.

The fuse is blown.

Rectify the problem that caused the fuse to blow, and then replace it. Be very sure 
to install the correct fuse with the same rate.

Noise and other factors are causing the built in 
microprocessor to operate incorrectly.

Turn the unit off  and then on again.

No sound is heard.

Cables are not connected correctly.

Connect the cables correctly.

There's audio skipping.

This unit is not fi rmly secured.

Secure this unit fi rmly.

Radio stations cannot be tuned in.

The signal strength of the stations is too weak. (When tuning 
in with automatic tuning.)

Tuned in the stations manually.

No station has been preset or preset stations have been 
cleared. (When tuning by scanning preset stations.)

Preset the stations. 

iPod/ iPhone does not work.

Check whether iPod / iPhone is connected to the unit 
correctly.

Connect it to the unit correctly.

The unit does not operate correctly 
even when the appropriate remote 
control buttons are pressed.

Battery power is low.

Load a new battery.

Summary of Contents for MAX420IP























Reviews: