LG LZ-H080GBA2, Installation Manual

Page: 6 / 19

6 Ventilator
Safety Precautions
Be cautious that water could not enter the
product.
• If water enters the product, there is risk of fire, electric
shock, or product damage.
Turn the breaker off when cleaning or
maintaining the product.
• There is risk of electric shock, if product is cleaned while the
breaker is on.
The outside ducts must be tilted at a gradient
(1/30 or more) down toward the outdoor area
from the ventilator unit, and properly insulated.
(The entry of rain water may cause power
leaks, fire or damage to household property.)
Glove should be worn when doing the
installation work. (There is risk of injury.)
Don't connect the ground wire
to the window frame or water
cock.
• There is risk of electric shock.
Do not install the product at a
smoky and oily place like
kitchen or factory.
• Otherwise. oil may adhere to the
filter or heating exchanger and cause
trouble.
Install the product in an
insulated space from outdoor
air.
• If the product is installed outside of the
insulated layer, dewing occurs inside of
the main body in winter and it causes
electrical shock or falling of condensed
water.
Installation
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
Use two or more people to
lift and transport the
product.
• Avoid personal injury.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
• It may cause corrosion on the
product. Corrosion, particularly on
the condenser and evaporator fins,
could cause product malfunction or
inefficient operation.
Use a soft cloth to clean. Do
not use harsh detergents, wax
or thinner, etc.
• Otherwise, color or surface of the
oroduct mav deteriorate.
Clean the filter and the heat
exchanger regularly and use
the gloves for cleaning.
• Accumulation of dust or debris
causes the deterioration of air volume.
Do not use the product for special
purposes, such as preserving
foods, works of art, etc. It is a
consumer ventilator, not a
precision refrigeration system.
• There is risk of damage or loss of
property.
Operation
Do not block the inlet or outlet of air flow.
• It may cause product failure.
Do not step on or put anyting on the product.
• There is risk of personal injury and failure of product.