ENG
ENGLISH
41
PRO:CENTRIC / CLOCK SETUP
y
Static Saving
: It is the item for setting the level to reduce the backlight control from the items for
saving the consuming power, which is increased or decreased by 10 steps from 0 to 100.
100 makes the consuming power set to the same one from the TV. 0 reduces the consuming power to
the minimum. The default value is 100.
- The value displayed at the OSD is not changed and only the actual setting value is converted to
percentage based on the static saving value to set.
- 0 ~ 30: HIGH, 40 ~ 60 : MID , 70 ~ 90 : LOW , 100 : OFF
y
Keyless Off Hours
: Automatically TV will be turned off if there is no key input for the preset time
period.
- Set the ‘OFF’, ‘1~99’.
CLOCK SETUP
(* Only for LX5**H series)
y
y
Image shown may differ from your TV.
Installation Menu (V 3.0)
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
No Signal Image
Network Setup
Pro:Centric
Power Saving
OK
S/W : 00.02.00.01 Micom : 0.00.32
Clock Setup
▲
Clock Display
Dimming Standby
Dimming PowerOn
Clock Source
Input
Program/Frequency
Time Zone (City)
(Offset)
IP Address
Clock Setup
15
70
Previous
OK
OFF
◄
No
►
OFF
OFF
London
GMT
0.0.0.0:0
1
Press the
button to select the Power Saving.
2
You can select ‘YES’ or ‘NO’ by pressing
button.
y
After selecting ‘
YES
’, you can see the LED Clock TV.
- Standby Dimming value Range: 0~15
- PowerOn Dimming value Range: 0~99
y
Clock Source
: You can select ‘Off’, ‘TV’, ‘Pro:Centric’ by pressing < > button.
y
Input
: Select a specific source to receive time information from. When the Clock Source is set to TV,
the available options are: Off, ATV, DTV, RADIO, CATV, CADTV, CA-Radio, SDTV, and S-Radio. When
it is set to Pro:Centric, the available options are RF and IP. If RF is selected, you can set the Program/
Frequency to receive time information. If IP is selected, the Program/Frequency option is disabled. You
can set the IP address and port number to receive time information.
Summary of Contents for LX30 SERIES
Page 54: ......
