Warning
•
Do not install this equipment in a
confined space such as a bookcase or
similar unit.
•
Wiring methods shall be in accordance
with the National Electric Code, ANSI/
NFPA 70.
•
This is a class A product. In a domestic
environment this product may cause
radio interference in which case the
user may be required to take adequate
measures.
•
To reduce a risk of fire or electric shock,
do not expose this product to rain or
moisture.
Caution
•
This installation should be made by a
qualified service person and should
conform to all local codes.
•
To avoid electrical shock, do not open
the cabinet. Refer servicing to qualified
personnel only.
•
The apparatus shall not be exposed to
water (dripping or splashing) and no
objects filled with liquids, such as vases,
shall be placed on the apparatus.
To disconnect power from mains, pull
out the mains cord plug. When installing
the product, ensure that the plug is easily
accessible.
LG Electronics hereby declares
that this/these product(s) is/are
in compliance with the essential
requirements and other relevant
provisions of Directive 2004/108/
EC, 2006/95/EC, and 2009/125/EC.
European Standards Centre:
Krijgsman 1, 1186 DM
Amstelveen The Netherlands
Disposal of your old appliance
1. When this crossed-out
wheeled bin symbol is
attached to a product
it means the product is
covered by the European
Directive 2002/96/EC.
2. All electrical and electronic
products should be
disposed of separately from
the municipal waste stream
via designated collection
facilities appointed by the
government or the local
authorities.
3. The correct disposal of
your old appliance will help
prevent potential negative
consequences for the
environment and human
health.
4. For more detailed
information about disposal
of your old appliance,
please contact your city
office, waste disposal
service or the shop
where you purchased the
product.
EEE Compliance with Directive.
(for Turkey only)
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
Handling of the unit
Be careful not to spill water or other liquids on
the unit. Be cautious not to get combustible or
metallic material inside the body. If used with
foreign matter inside, the camera is liable to
fail or to get cause of fire or electric shock.
•
Remove dust or dirt on the surface of the
lens with a blower.
•
Use a dry soft cloth to clean the body. If it
is very dirty, use a cloth dampened with a
small quantity of neutral detergent then
wipe dry.
•
Avoid the use of volatile solvents such
as thinners, alcohol, benzene and
insecticides.
They may damage the surface finish and/
or impair the operation of the camera.
Operating and storage
location
Avoid viewing a very bright object (such as
light fittings) during an extended period. Avoid
operating or storing the unit in the following
locations.
•
Extremely hot or cold places (operating
temperature -10 °C to 50 °C, however, we
recommend that the unit be used within
a temperature range of 0 °C to 45 °C)
•
Damp or dust place
•
Places exposed to rain
•
Places subject to strong vibration
•
Close to generators of powerful
electromagnetic radiation such as radio
or TV transmitters.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
•
Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
AB28
MODEL
LW9422 series
Please read this manual carefully before operating
your set and retain it for future reference.
OWNER'S MANUAL
Network Dome Camera
a
b
c
d
e
f
g
h
i
a
BNC connector cover cap
b
Video output BNC connector
c
Data Port A (RJ-45)
Input data port for alarm (relay) signal. RS-485 data communication is not available.
d
Data Port B (RJ-45)
Output data port for alarm (relay) signal.
e
AUDIO IN (Line Level Input)
Input for a mono microphone, or a line-in mono signal.
f
AUDIO OUT (Line Level Output)
Connect to an active speaker with a built-in amplifier.
g
Power input jack
h
ETHERNET Port
Connects to a PC or a network via a hub with a 10 BASE-T/100 BASE-TX cable attached
RJ-45 connector.
i
Dome Cover
Accessories
•
Software Installation CD
•
Cover adaptor
•
Mount adaptor
•
RJ-45 Cable
•
RJ-45 adaptor cable
•
Wrench
•
M3 SAMS Screws
Item
LW9422 Series
Image Sensor
6.49 mm (1/2.8 Type) CMOS Sensor
Total Pixels
1 920(H) X 1 080(V), 2M
Lens
F1.6(Wide) to F2.1(Tele), f=5.3 to 63.6mm
x12 Optical Zoom, x12 Digital Zoom
Day&Night
ICR Day & Night (Day / Night / Auto)
Mininum
Illumination
(30IRE)
Color
1 lx (AGC High, Sens-up Off )
B/W
0.1 lx (AGC High, Sens-up Off )
White Balance
Auto / ATW / One Push / Manual
Shutter Speed
1/160 to 1/10 000
Iris
Auto / Manual
BLC
Off / WDR/ BLC
3D-DNR
OFF / LOW / MIDDLE / HIGH
AGC
OFF / LOW / MIDDLE / HIGH
Privacy Mask
8 Masks
Multi-Streaming
Dual Streaming
Video Out
1xBNC
Resolution (Maximum)
Up to 1 920 x 1 080
Frame Rate (Maximum)
30 fps @ 1 080p (1 920 x 1 080)
Bit Rate
256 kbps to 10 240 kbps
Audio Compression
G.711, G726
Audio In/Out
1/1
Sample Rate
8 KHz
Audio Bit Rate
G.711: 64 kbps, G.726: 24 kbps, 32 kbps
Ethernet
10/100 Ethernet
Protocol
TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP
Remote S/W
LG Ipsolute VMS or Web Client
Pan/Tilt
Travel Range
Pan:360˚(Endless), Tilt:180˚
Speed
Preset
500˚/second
Jog
0.1˚ to 360˚/second
Preset
128
Pattern
4 Patterns (760 command/Pattern)
Auto Pan
2 points to 8 points
Group
9 Groups (8 presets/Group)
Sensor /
Alarm
Sensor
4 Inputs, Photo-Coupler Input
Alarm
2 Relay Outputs, Max Load : DC 30 V 1 A / AC 125 V 0.3 A
IP Reset Button
Support
Misc.
Mount Accessory Mount Adaptor
Material
Dome
Polycarbonate
Internal
Polycarbonate, ABS
External
Aluminum
Rated Power
PoE+ / AC 24 V (49 W)
Waterproof
IP66
Fan
Always ON
Heater
Operation start from Internal Temperature 10˚C
Operation
Temperature
-20˚C to 50˚C
Weight
about 3.3 Kg
Dimension
Ø 195.8 mm x 229 mm
Specifications
Part Names and Functions
