11 Setup
Line Lock Phase Adjustment Volume
This function is that V SYNC sig-
nal of the VIDEO signal can
move based on the power sig-
nal. Use this function when
screen conversion of the cam-
eras can't become softly. (When
screen conversion is working, it
prevents the screen from
becoming jump with vertical
direction.)
Adjustment
1. Using the VIDEO monitor
When you change the signal of the camera based on the
specific one camera, adjust the Line Lock phase adjustment
volume. (Detail setting is not available)
2. Using the measuring appliance
Turn the trigger source of Oscilloscope switch to 'LINE' and
adjust the Line Lock phase adjustment volume to set the
VIDEO SYNC as the same location based on the one cam-
era. (Detail setting is available)
*
If necessary, adjust the Line Lock phase to synchronize the
image again.
Line Lock Phase
Adjustment Volume
