LG LV901 Instruction Manual Download

Page: 3 / 36

y
o

e
s

•

Holes in metal, through which insulated wires
pass, shall have smooth well rounded surfaces or
shall be provided with brushings.

Warning:

Do not install this equipment in a confined

space such as a bookcase or similar unit.

Warning:

Wiring methods shall be in accordance with

the National Electric Code, ANSI/NFPA 70.

Warning:

This is a class A product. In a domestic

environment this product may cause radio interfer-
ence in which case the user may be required to take
adequate measures.

Warning:

To reduce a risk of fire or electric shock, do

not expose this product to rain or moisture.

Caution:

This installation should be made by a quali-

fied service person and should conform to all local
codes.

Caution:

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel only.

Caution:

The apparatus shall not be exposed to water

(dripping or splashing) and no objects filled with liq-
uids, such as vases, shall be placed on the apparatus.

Disposal of your old appliance

1. When this crossed-out wheeled bin

symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC.

2. All electrical and electronic products

should be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the gov-
ernment or the local authorities.

3. The correct disposal of your old appliance

will help prevent potential negative conse-
quences for the environment and human
health.

4. For more detailed information about

disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you purchased
the product.

This product is manufactured to com-
ply with EMC Directive 2004/108/EC and
Low Voltage Directive 2006/95/EC.

European representative :

LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The
Netherlands
(Tel : +31-036-547-8940)

To disconnect power from the mains, pull out the
mains cord plug. When install the product, ensure
that the plug is easily accessible.

Summary of Contents for LV901





































Search results

Summary of Contents for LV901

Reviews:

Related manuals for LV901

Brands by name

Popular brands

LG LV901, Instruction Manual

Search results

Summary of Contents for LV901

Reviews:

Related manuals for LV901

Brands by name

Popular brands