background image

Owner's Manual 

3

Safety Precautions

Safety Precautions

To prevent injury to the user or other people and property damage, the following instructions
must be followed.

Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness
is classified by the following indications.

Meanings of symbols used in this manual are as shown below.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage.

Be sure not to do.

Be sure to follow the instruction.

Installation

Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.

• There is risk of fire or electric

shock.

For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.

• Do not disassemble or repair the

product. There is risk of fire or
electric shock.

Always ground the product.

• There is risk of fire or electric

shock.

Install the panel and the
cover of control box
securely.

• There is risk of fire or electric

shock.

Always install a dedicated
circuit and breaker.

• Improper wiring or installation

may cause fire or electric shock

Use the correctly rated
breaker or fuse.

• There is risk of fire or electric

shock.

Summary of Contents for LTND4881QC





















Reviews: