LG LT-B2861HL, Owner'S Manual

Page: 5 / 21

5
4
7
5
3
6
10
2
8
9
1
ENGLISH
Optional Function
• WIRELESS REMOTE CONTROLLER
This air-conditioner is equipped with wired remote controller basically. But if you want to be
available with wireless remote controller, you pay for it.
• AIR-FILTER CHECKING FUNCTION(OPTIONAL)
It will display in the remote controller display when an air filter is polluted.
Then clean the air-filter for reference to this Manual (page 17).
Press the “Set and clear Button” and the “Room Temperature Checking Button” simultaneously after cleaning the air filter.
CAUTION
of handling the Remote Controller
• Aim at the signal receptor on the wired remote controller so as to operate.
• The remote control signal can be received at a distance of up to about 7m.
• Be sure that there are no obstructions between the remote controller and the signal receptor.
• Do not drop or throw the remote controller.
Do not place the remote controller in a location exposed to direct sunlight, or near the heating unit, or any
other heat source.
• Block a strong light over the signal receptor with a curtain or etc. so as to prevent the abnormal operation.
(ex:electronic quick start, ELBA, inverter type fluorescent lamp)
FAN Operation Button
Used to circulate room air without cooling or heating
Cooling Operation Button
Soft Dry Operation Button
Used to dehumidify without overcooling.
Heating Operation Button
(Heat pump model only)
Timer Set Button
Used to set the timer when the desired time is
obtained.
Then the wired remote controller is set to 24
hours by an hour but the wireless remote
controller is set to 7 hours by an hour.
Therefore, if you want to set over 7 hours, use
the wired remote controller.
Fan Speed Button
Used to set the desired fan speed.
Auto Swing Button
Used to swing up and down.
On/Off Button
Operation starts when this button is pressed,
and stops when the button is pressed again.
Set Temperature Button
Used to set the temperature when the desired
temperature is obtained.
Auto Operation Button
Remote Controller
Signal transmitter
Transmits the signals to the signal receptor.