24
OPERATION
Control Panel Features
* Depending on the model, some of the following
functions may not be available.
Select Crushed Ice or Cubed Ice by pressing the
Ice Type button repeatedly to choose the
selection desired. The Crushed Ice or Cubed Ice
icon will light up to indicate your selection.
Select Crushed Ice, Cubed Ice or
Water by pressing the Dispenser
button repeatedly to choose the
selection desired. The Icon will
light up to indicate your selection.
• The Refrigerator Temp. Control ranges from
33°F to 46°F (1°C to 8°C). Press the Refrigerator
button to cycle through the available
temperature settings one increment at a time.
• The Freezer Temp. Control range is from -6°F to
8°F (-21°C to -13°C). Press the Freezer button to
cycle through the available temperature settings
one increment at a time.
To dispense water or ice, gently push your cup
against the dispenser pad (see page 26).
Selecting this icon indicates that cubed ice
will be dispensed when the dispenser pad
is activated.
Selecting this icon indicates that crushed
ice will be dispensed when the dispenser
pad is activated.
Vertical Display
Ice Type
Vertical Display
Horizontal Display
Temperature
Temperature Mode Switch Function
(°F <->°C)
Horizontal Display
• Hold your cup in place for a couple of seconds
after dispensing ice or water so the last few drops
go in your cup instead of on the floor.
NOTE
• When changing control settings, wait 24 hours
before making additional adjustments. The
controls are set correctly when milk or juice is
as cold as you would like and when ice cream is
firm. If the temperature in either compartment
is too cold or too warm, change the setting
one increment at a time. Wait 24 hours for the
change to stabilize before adjusting again.
NOTE
• If you want to convert °F to °C or vice versa,
press and hold the Freezer and Refrigerator
buttons at the same time for approximately
five seconds. (Type 2 is not available)
LED Display
Indicator
Control
Button
LED Display Indicator
Control Button
