EN
G
LI
SH
3
Do not wipe the product with a wet towel and do not use
any heater or humidifier below where the product is
installed.
If water flows into the product or if moisture and heat are applied
to the product, it can cause a fire, an electric shock or problem to
the product.
Unplug the power cord from the power outlet before
installing the product.
If you install the product with the power cord plugged, it can
cause an electric shock or a fire.
Donot install the product near any object that may
cause vibration.
Do not install the product near any high voltage power cable
or power source.
Do not install the product with bare hands. Always
wear proper work gloves.
It can cause an injury.
Do not allow the video connectors connected to the
display to press against the wall. Use the included right-
angle adapters if needed.
Only use attachme
nts/accessories specified b
y the manufacturer.
Install the product according to the directions in the user
manual.
If the product is not installed based on the directions in the user
manual, it can cause a serious injury or damage to the product.
When drilling holes in the wall, always use a drill bit
and drill of designated diameter. Also follow the
designated directions for the depth of the hole.
If the product is installed without following the designated
method, the product may be unstable and cause a safety
issue.
When installing the product or adjusting the height of
the product after installing, always do so with 2
people.
Working alone can cause the product to fall off and result in
injury or damage to the product.
During the installation, check the type of wall material
and use the sealed anchor and screw if the conditions
comply.
If you do not use the designated anchor or screw, the mount
may not be able to withstand the weight of the product and
cause a safety issue.
Caution
Before installation
* Do not use the product for purposes other than mounting a display on the wall.
* When installing/using the wall mount, be cautious of product damage and avoid accidents.
* If you have not fully read and understood the installation manual, do not install the product and contact
the dealer to have a specialized installer install the product for you.
* Even if you are not a specialized installer, it is advantageous to have experience in mechanical or
construction field in completely understanding this manual and installing the product.
* This product is designed to be mounted to walls that use standard intervals between the studs.
* Install the screw to attach the wall mount so that it can be assembled at the center from both ends of
the studs. Use of stud finder, a separate device, is recommended.
* Install the product only on a vertical wall. The manufacturer is not responsible for issue from installing
the product on severely wall or on the ceiling.
* Keep the included accessories out of reach of babies or children as it can cause safety issues including
suffocation from swallowing the parts.
* Make sure screws are tight against the wall, but do not overtighten.
* Be careful not to install a TV that exceeds the weight restrictions of the wall mount.
* Be careful with the tools used during installation to prevent accidents or damage.