6
→
After mounting the display, insert the safety pin as shown. If the safety pin is not fixated as shown in the picture,
the display can fall.
→
After the install is finished, pull the bottom part of the display to verify the product is attached securely.
→
The clearance from the wall is 14 mm (32LE46* : 36 mm) for this product.
→
In using cables or accessories not provided with the wall mount, make sure to keep a certain distance from the
wall so that excessive force is not applied on cables or accessories.
6
If the product is not leveled after the
installation, you can rotate the display
up to 5 degrees.
±
5
°
±
5
°
7
5
How to assemble the wall mount support and display
- Always install the display with 2 or more people.
How to level the Display
Cable arrangement and set protection cushion
- Arrange the cables as shown in the picture. Use some type of cable banding
device to hold all the cables together. Attach the set protection cushion to
mitigate the impact between the wall and the set when adjusting the angle.
Attach the set protection cushion as shown in the picture.
Safety pin
