LG LST-5100P, Owner'S Manual

Page: 7 / 38

7
INTRODUCTION
Unpacking HDTV Receiver and Accessories/Connection Overview
Audio/Video Jacks and Cables
The Audio/Video jacks provide excellent picture and sound quality. They are
used for making most Audio/Video connections between components. The
Audio/Video jacks may be color coded (yellow for video, red for right audio,
and white for left audio). If your component has only one input for audio
(mono), connect it to the left (white L/mono) audio jack on the HDTV
Receiver.
Component Out Jacks and Cables
Component Cables are used to connect the HDTV Receiver to an industry
standard YPbPr compatible HD Monitor (green for Y, blue for Pb, and red
for Pr). Remember to connect the left and right audio cables. The YPbPr
Component jacks carry only the picture signals, not the sound.
ANT LOOP OUT Jack, and RF Cable
ANT LOOP OUT provides an RF connection between the HDTV Receiver
and the TV and provides the signal of ANT IN jack to TV.
Remote Control
In addition to the HDTV Receiver, the remote control can be programmed to
control many other devices.
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: About 7 m from the front of the remote sensor.
Angle: About 30° in each direction of the front of the remote sensor.
Remote Control Battery Installation
Remove the battery cover on the rear of the remote control, and insert two
batteries (size AAA) with
and aligned correctly. Reinstall cover.
Caution
Do not mix old and new batteries. Never mix different types of batteries (stan-
dard, alkaline, etc.).
Make sure you have received all the accessories listed below with the High Definition Television Receiver.
AAA
AAA
High Definition Television Receiver
The HDTV Receiver is capable of receiving signals from over-the-air antenna sources and
sending the signals to your TV.
Included with the Receiver are the following accessories.
Audio Cable Video Cable
Component (YPbPr) Cable RF Cable
Remote Control 2 AAA Batteries