LG LST-280T, User Manual

Page: 12 / 27

23 22
Enable or Disable Emergency Call
1. Press “#”+ “#”+ “2” continuously to enter
Emergency Call programming mode.
2. Press “#” and Enable code (“1”) or Disable code
(“2”).
3. Press “
J
” to save.
Erase All Emergency Call Numbers
1. Press “#”+ “#”+ “2” continuously to enter
Emergency Call programming mode.
2. Press “#” and “3” to erase all Emergency Call
Numbers.
3. Press “
J
” to store.
Note1 : Emergency Call feature is disabled after erase
operation executed
Note :
- If Emergency Call is disabled and Emergency Call
number has been already programmed, you can
make enable Emergency Call by pressing “#”+
“#”+ “2”+ “#”+ “1”+”
J
”without entering a
Emergency Call Number again.
5.3 Hot Line
While the Hot line function is enabled, the
programmed number will be automatically dialed when
you pick up the handset and wait for the programmed
hot line time (2
~ 10sec) without any key press.
Programming the Hot Line Number
1. Press “#”+ “#”+ “3” continuously to enter Hot
Line programming mode.
2. Press “#” and Hot Line Enable code “1”.
3. Press “#”and Hot Line phone number (Max. 32
digits).
4. Press “
J
” to save and enable this function.
Enable the Hot Line Feature
1. Press “#”+ “#”+ “3” continuously to enter Hot
Line programming mode.
2. Press “#” and Hot Line Enable code “1”.
3. Press “
J
” to save.
Programming
Programming
Programming
Programming
Enable or Disable Speed Dial
1. Press “#”+ “#”+ “1” continuously to enter
Speed Dial programming mode.
2. Press “#” and “1” or “2” to Enable or Disable
respectively.
“1” - Speed Dial Enable
“2” - Speed Dial Disable
3. Press “
J
” to store.
Erase All Speed Dials
1. Press “#” + “#” + “1” continuously to enter
Speed Dial programming mode.
2. Press “#” and “3” to erase all Speed Dials.
3. Press “
J
” to store.
Note1 : Speed Dial feature is disabled after erase
operation executed
Operation
1. Make a Speed Dial function enable.
2. Lift handset and dial tone will be heard.
3. Press Speed Dial number and wait for dial
timeout.
If user press “
J
” button after dialed the
number, the terminal make a call immediately.
5.2 Emergency Call
LST-280T has 3 emergency call numbers (1
~
3) and
max. 32 digits can be stored in each emergency call
number.
Entering the Emergency Phone Number
1. Press “#”+ “#”+ “2” continuously to enter
Emergency Call programming mode.
2. Press “#” and one of the emergency memory
location numbers (1 ~ 3).
3. Press “#” and the phone number (Max. 32
digits).
4. Press “
J
” to save and enable this function.