17
Installation
Height adjustment
- To level the door when the floor not level.
When the freezer door is lower –
Use the (-) driver or wrench to turn the groove
or nut of the height adjustment screw on the
left to the clockwise direction to level the
door.
When the refrigerator door is lower –
Use the (-) driver or spanner to turn the
groove or nut of the height adjustment
screw on the right to the clockwise
direction to level the door.
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
When the floor is
not leveled
When the refrigerator door is lower than the freezer door while using the
refrigerator, level the doors.
1. Use the
tool for adjustment on
the wide side to turn nut
( )
in the clockwise direction to loosen
the keeper nut.
2. Use the
tool for adjustment on
the narrow side to turn the
adjustment hinge pin
in
( )clockwise direction or
( ) counterclockwise
direction to adjust the height of
the refrigerator and freezer doors.
3. After aligning the height of the door, turn the
keeper nut counterclockwise tightly.
When the
refrigerator door
is lower than the
freezer door
After leveling the
door height
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet. Use a dedicated outlet and circuit.
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 2" (5 cm). The period goes between the
parentheses. (Unusual construction))
CAUTION
Wrench Size
Adjust Hinge Pin: 11/32”(8 mm)
Keeper Nut: 3/4” (18 mm)
