LG LSP-W1000, Owner'S Manual

Page: 21 / 41

21
Sender Mail
l
Mail Send
- ON: Select to enable Mail function.
- OFF: If you set to OFF, the [SMTP Server], [Mail
Address] and [Password] options are dimmed
and these options are not set.
l
SMTP Server : Enter the SMTP Server address.
l
Mail Address: Enter the mail address.
l
Password: Enter the password.
Notes:
• After change the options, select [Apply] icon and
press ENTER to confirm the settings. When you
press ENTER, the test mail will be sent via the
SMTP server to the user mail address automati-
cally and the settings are saved when the mail
test of the SMTP server is correct.
• You should know the SMTP server address of
a mail service provider to use the SMTP server.
(You should use the port number 25 of the SMTP
server for this function.)
Receiver Mail
l
Address (1~4): Enter the receiver mail address.
You can input up to 4 E-mail addresses.
Note:
After change the options, select [Apply] icon and
press ENTER to confirm the settings.
Notification
Set the notification options.
1. Select item and press ENTER.
A checking mark appears in front of the selected
option.
2. Select [Apply] icon and press ENTER to confirm
your settings.
l
Motion Detection: Sends an E-mail when motion
detection has occurred.
l
USB storage Full: Sends an E-mail when the disc
has fully recorded.
l
Admin PW Change: Sends an E-mail when the
administrator password has changed.
l
Camera Disconnect: Sends an E-mail when a
video signal from the camera has stopped because
of a cable disconnection or malfunction of a cam-
era.
Note:
For the E-mail sending function, the motion detection
has 1 minute term before sending an E-mail again.
Introduction
Hookup and
Settings
Recording
Search and
Playback
Client
Program
Reference