LG LSP-3510, User Manual

Page: 9 / 30

Basic Operations
Basic Operations
16
Basic Operations
Basic Operations
17
3 Basic Operations
3.1 Making a Call
You can make a call as follows.
1. Pick up the handset or press button.
2. Listen for dial tone.
3. Enter the phone number with area code if
needed.
4. Wait for the Auto Time-out or Press
button.
5. The call is connected and you may start
conversation.
6. To disconnect the call, replace the handset or
press button.
When the user presses the button after
dialing any desired number, if the user picks up the
handset or presses the
button, the phone makes
a call immediately.
3.2 Redialing Last Number
You can make a redial to last number, shown in All
Calls.
1. Pick up the handset or press button.
2. Listen for dial tone.
3. Press button.
4. The call is connected and you may start
conversation.
5. To disconnect the call, replace the handset or
press button.
આ
You can also dial any of the last 60
(RIn Call Memo)
numbers stored in All Calls.
3.3 3 way call conferencing
You can start tripartite conversation.
1. Enter the phone number of the 2nd party phone
while you are in telephonic conversation with 1st
party.
D Diiaall//FFllaasshh
D Diiaall//FFllaasshh
D Diiaall//FFllaasshh
2. Press button.
This service should be provided by your service
provider.
3.4 Call Waiting
While a call is in progress, you may hear two beeps
indicating another incoming call. When call wait is
enabled, you may put the active call on hold while you
answer the other incoming call.
1. Press or button, Call
Waiting window then disappears.
2. Press button, you may start
conversation with called number.
3. Re-press button, you may start
conversation with previous number.
3.5 Volume Control
1. Press button of navigation while in
a call, to adjust Earpiece volume.
2. Press button of navigation while in
a call, to adjust MIC volume.
3.6 Receiving a Call
When the bell rings or backlight blinks in Light mode,
you can receive a call as follows.
1. Pick up the handset or press the button.
2. Start a conversation.
3. To disconnect the call, replace the handset or
press the button.
3.7 Lock Mode
Protects your phone from unauthorized use. Once the
phone is locked, it is in restricted mode, until the in
lock code is entered. This will allow you to receive
phone calls and still make only emergency calls. The
lock code/password on your phone is “0000” by
default. If you need to modify the lock code, you may
modify it using the new lock code within the security
set Menu.
U Up p//D Do ow wnn
LLeefftt//R Riigghhtt
D Diiaall//FFllaasshh
D Diiaall//FFllaasshh
EEN ND D//PPW WR R C Clleeaarr
D Diiaall//FFllaasshh