LG LSP-345 Manual Download Page 14

Page: 14 / 58

LSP-345

LGE CDMA Fixed Wireless Telephone

2.3 Installation

You should follow each step carefully as shown below in order to guarantee proper operation of

CDMA Fixed Wireless Telephone.

STEP I. Check Components

Fixed Wireless Terminal is supplied with the following standard unit and accessories;

1. LSP-345 Main Unit with Handset

-1EA-

2. Dipole Antenna

-1EA-

3. Backup Battery

-1EA-

4. User Guide

-1EA-

5. AC/DC Power Adapter

-1EA-

6. Power Cord(Only SMPS Adapter)

-1EA-

Please make sure that these components are present before you begin the unit installation.

And then compare the following figures and components. If components are missing or

damage is found, contact the store where you purchased the unit immediately.

STEP II. Place the Terminal

Place the terminal on the stable flat secure surface area (desk, table, etc.). Serious

damage may result if the unit falls. Do not place the unit on, or within 1 meter of heaters or

radiators. This unit is designed for desktop usage. Avoid direct exposure to sunlight and

damp areas.

Read the SAFETY INFORMATION located at the first part of this document before you

place the terminal.

STEP III. Connect Components (See the figures in “Installation Steps”.)

Connect the antenna to the TNC antenna connector located at the topside of the terminal.

If you have placed the terminal on a flat surface, position the antenna up right.

Connect curl cord of handset assembly to the RJ-11 port located at the left side of the

terminal.

Open the battery case, securely connect the battery cord, place the backup battery pack

and close the case.

Connect the AC/DC Adapter cable to the DC input port located at the topside of the

terminal.

Summary of Contents for LSP-345



























































Search results

Summary of Contents for LSP-345

Reviews:

Related manuals for LSP-345

Brands by name

Popular brands

LG LSP-345, Manual

Search results

Summary of Contents for LSP-345

Reviews:

Related manuals for LSP-345

Brands by name

Popular brands