
15
INSTALLATION
ENGLISH
Optional Rear Filler
If the counter does not bridge the opening at the rear
wall the rear filler kit, that is provided with the slide in
range, will be needed.
NOTE
If the countertop depth is greater than 25" there
will be a gap between the filler kit and the back
wall.
If the countertop depth is less than 24", the control
panel will not sit flush with the countertop.
Installing the Rear Filler
1
Using a screwdriver, Remove the three screws
holding the rear bracket in place.
Rear bracket
2
Attach the rear bracket and filler assembly as
shown, using three screws removed in step
1.
Rear filler
Test Run
Check if the range is properly installed and run a test
cycle.
1
Before using the cooktop for the first time, clean
it with a ceramic cooktop cleaner. This helps
protect the top and makes cleanup easier.
2
Turn the oven mode knob to the
Off
position to
start test.
3
Turn each knob to the
Hi
position to check that the
surface heating elements are working properly. The
elements should glow red and radiate heat, and
they should cycle on and off periodically even when
the knob is in the
Hi
position. This cycling prevents
the glass-ceramic from being cracked by thermal
shock.
IMPORTANT
: The Warming Zone does not
consume enough power to glow red.
4
*For Model : LSE5615 / LSE5613
After checking all the surface heating elements,
check the locking system by pressing
Probe
(LSE5615 model only) or
Clock
for three seconds.
The oven door should lock and the cooktop should
not operate while the Lockout function is turned on.
Pressing
Probe
(LSE5615 model only) or
Clock
for
three seconds to disable Lockout.
5
Now check the oven's operation. Turn the oven
mode knob to select the
Bake
mode. 350 °F
appears in the display. Press
Start
.
6
The oven should finish preheating in 15 minutes,
and the convection fan should operate while the
oven is preheating.
7
After checking the oven's operation, turn the
temperature up to 450 °F and leave the oven on for
at least an hour to help remove any oil which might
cause smoke and odors when first using the oven.
NOTE
Smoke may come out of the range when it is first
used.
Summary of Contents for LSE4611 SERIES
Page 118: ...60 Aide mémoire AIDE MÉMOIRE ...