background image

Entry

The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.

Date of purchase

:

Dealer :

Dealer address

:

Dealer phone no.

:

Model no.

:

Serial no.

:

Before use, this refrigerator must be properly installed and located in accordance with
the installation instructions in this manual.

Never unplug your refrigerator by pulling on the power cord. Always grip the plug firmly
and pull it straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over the power
cord or to damage it in any way. Do not crush or damage the water line.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when your hands are damp or wet. Skin could adhere to
these extremely cold surfaces.

Unplug the power cord from the power outlet for cleaning or other requirements. Never
touch it with wet hands because you can get an electric shock or be injured.

Never damage, bend, kink, pull out, or twist the power cord because damage to the
power cord can cause product failure, fire, or electric shock. If you have doubts the
appliance is properly grounded, consult a qualified electrician.

Never place glass products in the freezer because they may be broken from expansion
when their contents are frozen.

Never put your hands within the ice storage bin of the automatic icemaker. You can be
injured by the operation of the automatic icemaker.

The appliance is not intended for use by young children without supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Never allow anyone to climb, sit, stand, or hang on the door. These actions may
damage the refrigerator and even tip it over, causing severe personal injury.

Before you move your refrigerator into its final location, 
it is important to make sure you have the proper electrical
connection:

A 115 Volt, 60 Hz., AC only 15, or 20 ampere fused, grounded
electrical supply is required. It is recommended that a separate
circuit serving only your refrigerator be provided. Use an outlet that
cannot be turned off by a switch. Do not use an extension cord.

The refrigerator-freezer should be so positioned that the supply plug
is accessible for quick disconnection in the event of an emergency.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid any hazard.

Do not modify or extend the Power Cord length.

It will cause electric shock or fire.

Introduction

3

Important safety instruction

Recommended

Grounding

Method

Accessibility of

Supply Plug

Supply Cord

Replacement

Warning

Summary of Contents for LSC 26905TT
































Reviews: