20
- It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu .
We offer a output terminal in one Pin of RS232C Jack for the use of communication .
- 5V DC Power Outlet and 12V DC Power Outlet must operate mutually exclusively . That is, only
one of the two sides must be turned on .
(4) rs232 Dc power outlet
type of connector: D-sub 9-pin Male
No .
Signal
Signal requirements
1
VCC
2
RX RS232
Standard RS232 specification
3
TX RS232
Standard RS232 specification
4
IR from TV
5
GND
Power ground
6, 8
Not connected
7
1 .5 A
+5VDC 10%, max 100mV ripple
9
1 .5 A
+12VDC 10%, max 100mV ripple
Male connector on box,
viewed towards connector .
9
1
5
6
OPTICAL
DIGITAL
AUDIO OUT AUDIO IN
(RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
1
2
You can select
‘off’
,
‘5V’
or
‘12V’
by pressing < >
button .
• When select
‘5V’
the 5V is forwarded through the port . when select
‘12V’
the 12V is
forwarded through the port .
1
Interface box
- It is a mode to set whether to update dtv channel automatically or not .
When DTV Channel Update is set to ’Auto’, the function to update TV’s programme map according to
dtv programme’s stream information .
DTV Channel Update is set to ‘Manual’, the function to keep TV’s programme map even though dtv
programme’s information is changed .
(6) DtV channel update
(This feature is not available for all models .)
- It is a mode to select 'On Timer Operation' working one time or repeatedly .
'
one
' : 'On Time' in the user menu operates only one time when the 'On Time' menu is set to 'ON' .
'
repeat
' : 'On Time' operates repeatedly when the 'On Time' menu is set to 'ON' .
(7) on timer operation
- Instead of "Audio Only", the name of a radio channel is displayed on the screen when a radio broadcast is playing .
- Set to Yes(Work) or No(Do Not Work) .
- If the setting is "Yes", the name of a radio channel is displayed for the radio channel .
- If the setting is "No", the text "Audio Only" is displayed for the radio channel .
(8) radio name Display
