background image

8-1 FUNCTION

8-1-1  Function

1. When the appliance is plugged in, it is set to "37 °F" for the Refrigerator and "0 °F" for the Freezer (set to "4" for

Refrigerator and "4" for Freezer). 
You can adjust the Refrigerator and the Freezer control temperature by pressing the COLDER button or the COLD button.

2. When the power is initially applied or restored after a power failure, it is automatically reset to "37 °F" and "0 °F" (set to

"4" and "4").

8-1-2  How to Change the Temperature Mode  to °F / °C 

1. The setting temperature mode can be changed to °F / °C by pressing the " °F / °C " button.

2. The initial setting is on °F. When the mode is changed the LED lights come on. 

8-1-3  Key Lock

1. The key pads can be locked by pressing and holding the KEY LOCK button for 3 seconds.

2. The lock light will be displayed and the key pads will be inoperable. 

3. Pressing and holding the KEY LOCK button for 3 seconds will reactivated the key pads.

8-1-4  OFF Function

1. To turn off the Best model, press and hold the °F/°C button for 3 seconds. To turn off the Better model, press and hld the

OFF key for 3 seconds.

2. In the Off mode, the Best model will display OFF in the control panel. The OFF light will be displayed on the Vetter model.

3. To cancel the OFF function, press the same keys and hold for 3 seconds.

8. DESCRIPTION OF FUNCTION & CIRCUIT OF MICOM

- 21 -

Sears Best Model

Control range : 32

°

F ~ 47

°

F

0

°

C ~ 8

°

C   

Control range : -6

°

F ~ 8

°

F

                         -21

°

C ~ -13

°

C

Sears Better Model

FREEZER

COLDER WARMER

°

F/

°

C

0

°

F IS RECOMMENDED

TEMPERATURE

REFRIGERATOR

LOCK

COLDER WARMER

HOLD 3 SECONDS

37

°

F IS RECOMMENDED

TEMPERATURE

FREEZER

OFF

TEMPERATURE

1

2

3

4

5

6

7

REFRIGERATOR

LOCK

ADJUST

HOLD 3 SECONDS

4 IS RECOMMENDED

TEMPERATURE

WARMER

COLDER

1

2

3

4

5

6

7

ADJUST

4 IS RECOMMENDED

WARMER

COLDER

Summary of Contents for LRTN19320









































Reviews: